our services

Apply our resources and extensive expertise to your project

our services

Apply our resources and extensive expertise to your project

From single services to turnkey solutions. We are flexible to your specific needs.

Architectural and room acoustics

Architectural and room acoustics

Order an entire acoustical planning for your space. We collect your data, build an acoustic 3D model, simulate in the engineering software, and develop a series of solutions. Or change and control the sound qualities selectively to meet your specific needs.

Balance your sound

Tonal balance, spaciousness, acoustic comfort.

Reduce sound reflections

Reverberation or surface reflections noise, echoes, low-freq resonances.

Make speeches intelligible

For a single speaker or for many simultanious conversations.

Create zones of acoustic privacy

So the speech from this zone is not clear at the certain distance.

Isolate premises acoustically (soundproofing)

From each other, from environmental noises.

Get rid of vibration noises

Whatever resonates with low-frequency airborn or impact sounds.

Use our professional services and support:

Acoustic measurements and analysis

WaveWork performs all kinds of full-scale acoustic and vibroacoustic measurements.

- Measurements of noise and vibration (measurements, mapping, monitoring)
- Measurements of sound insulation of walls, ceilings, and other surfaces (airborne sound, impact sound)
- Measurements of acoustic field qualities (acoustic parameters such as reverberation time, speech intelligibility, speech clarity, music clarity, privacy, spaciousness, the structure of sound reflections, low-frequency sound field analysis, etc.)
- Measurements in electro-acoustic mode, during the operation of the sound reinforcement system.

Sound isolation and noise protection

WaveWork deals with acoustic calculations and design in the field of noise protection (soundproofing) and provides the following works:

- development of soundproofing solutions for all types of buildings and structures
- development of noise reduction solutions for industrial premises and territories
- calculation of sound insulation of enclosures and penetrating noise levels using regulatory methods and computer modelling

Acoustic treatment

Specialists of WaveWork have extensive experience in developing solutions in the field of architectural and room acoustics. Solutions and recommendations are performed for the following main types of facilities:

- the concert, theater, and philharmonic halls
- music venues and night clubs
- recording and music production studios
- public and home cinemas
- multifunctional, conference, and meeting halls and rooms
- music classrooms, rehearsal rooms
- auditoriums, class rooms, kindergartens
- offices, open plan offices, co-working spaces
- indoor sports facilities, stadiums
- churches, mosques, museums, atriums

Check out our basic workflow:

1
Analysis of your plans and drawings
2
Calculating target acoustic values:
treatment
sound pressure levels, reverberation time and frequency response tolerance areas, diffusion levels.
INSULATION
sound insulation of enclosing structures, levels of penetrating noise, impact on the surrounding area.
3
Measuring parameters of the current acoustic field and existing barriers on-site.
Powered by professional measuring equipment and software AFMG EASERA, AFMG Soundflow, INSUL
4
Builing 3D models of premises in Autocad or SketchUp, and prepare them for the import into acoustic sortware.
5
Carrying out calculations to reach the best performance setup in compliance with international regulatory standards.
treatment
in the processed 3D models imported to the EASE 5 Pro software
INSULATION
using software for multilayer structures insulation design: INSUL, AFMG SoundFlow
6
Development of solutions for space planning, sound barriers, finishes and acoustic units.
7
Creating a single scientific-technical report containing descriptions, instructions, and illustrations related to each solution.
8
Creating an auralization demostration. It is when a client can see the 3D model of the premise and hear the acoustic event (speech, music, noise, etc.) in the initial state of the premise compared to developed acoustic solutions. The demonstration provides an accurate assessment and impression of the room's acoustics when heard in over-ear headphones of sufficient quality.
1
Analysis of your plans and drawings
2
Calculating target acoustic values:
treatment
sound pressure levels, reverberation time corridor, frequency response deviation limits, diffusion levels.
INSULATION
sound insulation of enclosing structures, levels of penetrating noise, impact on the surrounding area.
3
Measuring parameters of the current acoustic field and existing barriers on-site.
Powered by professional measuring equipment and software AFMG EASERA, AFMG Soundflow, INSUL
4
Builing 3D models of premises in Autocad or SketchUp, and prepare them for the import into acoustic sortware.
5
Carrying out calculations to reach the best performance setup in compliance with international regulatory standards.
treatment
in the processed 3D models imported to the EASE 4.4 software with the AURA 4.0 module, Treble.tech, or CATT Acoustic
INSULATION
using software for multilayer structures insulation INSUL, AFMG SoundFlow
6
Development of solutions for space planning, sound barriers, finishes and acoustic units.
7
Creating a single scientific-technical report containing descriptions, instructions, and illustrations related to each solution.
8
Creating an auralization demostration. It is when a client can see the 3D model of the premise and hear the acoustic event (speech, music, noise, etc.) in the initial state of the premise compared to developed acoustic solutions. The demonstration provides an accurate assessment and impression of the room's acoustics when heard in over-ear headphones of sufficient quality.

In compliance with:

WaveWork Acuostic planning according to German state standards DIN (Deutsches Institut für Normung)WaveWork Acoustic planning according to international standards ISO (International Organization for Standardization)WaveWork Acoustic planning according to sustainable building standards BREEAMWaveWork Acoustic planning according to LEED standards (Leadership in Energy and Environmental Design)

Electroacoustics

Reach the best possible performance of your sound reinforcement system.

Get the best matching system

that accurately unfolds the sound in a unison with your premise.

Get the cleanest sound possible

that is to be fine-tuned to target your dance floor, audience, or listening area.

Get the proper low-end punch

to bring that physical contact, feeling of grove and presence at music events.

Use our professional services and support:

Speaker layout design

WaveWork designs speaker layouts for premises of all kinds.

- standalone and in-wall speakers for music studios
- ground stacks and line arrays as stereo, quadraphonic, and delay configurations for clubs, music bars, event halls, open airs
- multichannel speaker layouts for 3D spatial sound including Full-dome (full-surround), Dolby Atmos, WFS, Cross-grid (4D sound), or any custom case you have
- Hi-Fi and Hi-End systems for home theaters and listening rooms

Software simulation

WaveWork uses pro-grade software to simulate and predict the behavior of the sound field in the target premise during the operation of the chosen speaker system, taking into account the actual state of the acoustic treatment. We calculate and evaluate:

- sound pressure distribution
- reverberation time
- the structure of sound reflections
- low-frequency sound field analysis

Powered by:

Installation & fine tuning

WaveWork stands for the cleanest sound possible. We help to choose the optimal listening area or dance floor and tweak the sound till it reaches the target at its' best quality.
‍
- we design the optimal signal flow and choose the right processing equipment
- we measure the sound quality on-site in real-time for an accurate system tuning
- we calibrate the result in the real event situation

Acoustic laboratory

Utilize our 5 scientific laboratories, built in accordance with ISO and DIN standards. All the labs are equipped with professional equipment (Brüel and Kjaer, DeweSoft) to conduct certifications, measurements, tests, prototyping, developments, and experiments.

Vibration chamber
vibration transmission measurements for all kinds of sound barriers

Anechoic chamber

Free field lab for speaker and microphone performance tests and noise (sound power levels) tests.

Impedance tube

Absorption rates measurements for acoustic materials.

Reverberation room

Absorption rates measurements for all types of objects in accordance with ISO 354.

Sound insulation lab

Measurements of airborn and impact sound transmission loss rates for all kinds of barriers.

Acoustic scale modelling

Simulation and measurement of the acoustic field in a downscaled model of the hall.

Worldwide equipment supply

Use our access to the official distributors' network of audio/music equipment and acoustic materials.

Get under-market prices

Use our access to global distributors network.

Receive it safe

Carefully packed, properly exported from the seller's country and imported in your country, delivered safe in time.

Interior Design

Create a place to be and listen. The quality of audio works or the depth of a listening experience seriously depend on the interior you are in.

Conceptual planning

In harmony with your personal preferences, culture, premise purpose, and location.

Construction planning

With drawings, specifications, schedules.

On-site coordination

of construction works.